Inductors
Common mode (CM) chokes are a type of electrical filter that reduces unwanted interference, by blocking high frequency noise but lets the desired signal to pass. Common mode noise current is usually found in sources such as unwanted radio signals, unshielded electronics, inverters and motors. If this noise is not filtered, then it can cause problems in your electronics and electrical circuits.RS Components have a great range of inductors including these common mode chokes with various inductance values and offer high attenuation over a wide frequency range.Why use common mode chokes?Common mode chokes can be used to help the prevention of electromagnetic interference and radio frequency interface. By using these chokes you can help stop your electronic devices from malfunctioning.Things to consider before purchasing a common mode choke:ImpedanceFrequency bandwidthCurrent handlingTypical Applications include:Common mode chokes are often used in electrical, industrial and telecommunication applications to help reduce or remove noise and electromagnetic interference. They can be found in:Data storage systemsDigital video cameraIndustrial systemsProfessional audio
-
EPCOS 10 mH -30 → +50% Ferrite Power Line Choke, Max SRF:10kHz, 1.1A Idc, 400mΩ Rdc 250 V ac, B82731M
VND193,537.75Bag (1 Bag of 3) -
TDK WT Wireless Charging Coil Transmitter, 6.3 μH, 50mm dia.
VND196,466.97 -
Wurth, WE-MI, 1206 (3216M) Shielded Multilayer Surface Mount Inductor with a Ferrite Core, 10 μH ±10% Multilayer 25mA
VND216,762.28Pack (1 Pack of 20) -
Bourns, SRP1265A, 1265 Shielded Wire-wound SMD Inductor with a Carbonyl Powder Core, 6.8 μH ±20% Wire-Wound 11.5A Idc
VND218,436.12Bag (1 Bag of 5) -
TDK, MLF1608, 0603 (1608M) Multilayer Surface Mount Inductor with a Ferrite Core, 10 μH ±10% Multilayer 10mA Idc Q:30
VND223,248.41Bag (1 Bag of 100) -
Murata, LQW18A, 1608 Wire-wound SMD Inductor with a Non-Magnetic Ceramic Core, 0.018 μH ±2% Wire-Wound 550mA Idc Q:40
VND225,549.94Pack (1 Pack of 100) -
Murata, LQW18A, 1608 Wire-wound SMD Inductor with a Non-Magnetic Ceramic Core, 0.015 μH ±2% Wire-Wound 600mA Idc Q:40
VND226,596.09Pack (1 Pack of 100) -
TDK, SLF, 12565 Wire-wound SMD Inductor with a Ferrite Core, 22 μH ±20% Wire-Wound 3.8A Idc
VND233,500.68Bag (1 Bag of 10) -
Wurth 33 μH ±15% Manganese Zinc Ferrite Wire-Wound Surface Mount Inductor, Max SRF:6.29MHz, 36A Idc, 1.31mΩ Rdc, WE-HCF
VND253,586.76 -
RS PRO 47 μH ±15% Power Inductor, 3A Idc, 0.048mΩ Rdc
VND256,306.75Pack (1 Pack of 5) -
Bourns, SRN6045TA Shielded Wire-wound SMD Inductor with a Ferrite Core, 15 μH ±20% Semi-Shielded 2.8A Idc Q:15
VND259,445.20Pack (1 Pack of 25) -
TDK 11 μH 300 mA Common mode filter 0.4Ω 80V
VND262,374.42Pack (1 Pack of 5) -
RS PRO 100 μH ±15% Power Inductor, 3A Idc, 0.08mΩ Rdc
VND279,531.28Pack (1 Pack of 5) -
RS PRO 47 μH ±15% Power Inductor, 5A Idc, 0.043mΩ Rdc
VND284,134.34Pack (1 Pack of 5) -
Wurth, WE-SL3 SMD Common Mode Line Filter with a Ferrite Core, 20 μH -30 → +50% Wire-Wound 500mA Idc
VND287,063.56Pack (1 Pack of 5) -
RS PRO 100 μH ±15% Power Inductor, 5A Idc, 0.059mΩ Rdc
VND291,875.85Pack (1 Pack of 5) -
Wurth, WE-SL3 SMD Common Mode Line Filter with a Ferrite Core, 51 μH -30 → +50% Dual 500mA Idc
VND292,294.31Pack (1 Pack of 5) -
RS PRO 150 μH ±15% Power Inductor, 3A Idc, 0.107mΩ Rdc
VND312,798.85Pack (1 Pack of 5) -
RS PRO 100 μH 500 mA Common Mode Choke 260mΩ
VND333,931.08Reel (1 Reel of 5) -
RS PRO 220 μH ±15% Power Inductor, 3A Idc, 0.134mΩ Rdc
VND345,857.19Pack (1 Pack of 5) -
RS PRO 47 μH ±15% Power Inductor, 1A Idc, 0.063mΩ Rdc
VND349,414.10Pack (1 Pack of 10) -
Wurth Elektronik 2 x 500 μH 1 A Common mode filter 2 x 0.15Ω 80V
VND353,807.93Pack (1 Pack of 5) -
RS PRO 100 μH ±15% Power Inductor, 10A Idc, 0.044mΩ Rdc
VND365,315.58Pack (1 Pack of 2) -
RS PRO 1 mH ±15% Power Inductor, 1A Idc, 0.426mΩ Rdc
VND375,986.31Pack (1 Pack of 5)